Concrete Deck and Flooring Restoration

Flooring

Flooring Products

Systems for Repair, Protection, Waterproofing Slip-Proofing, Chemical Resistance and Appearance Enhancement of Commercial & Industrial Floors

Cement-Based Leveling & Resurfacing

RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6

EXPO 43 Latex-Modified, Cement-Based Wall Coating

System 44 Concrete Repair Mortars

Custom SYSTEM 45 Custom Color Masonry Repair & Coating Compounds

DECK-TOP 47, 47-RC Thin Resurfacers for Concrete Floors and Decks (Regular & Rapid-Cure Formulas)

SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel

FLO-PLUG 50 Hydraulic Cement

LEVEL-X52, 52XT Self-Leveling, Self-Smoothing Polymer Modified Floor Toppings (Regular & Exterior Grades)

PUMP-X 53, 53i, 53iE, 53iL Pumpable Cementitious Grouts

Epoxy-Based Patching

Odorless, moisture-insensitive, 100% solids epoxy overlays, patching mortars, concrete and bonding agents provide fast turnaround, non-shrink stability and higher strength and chemical resistance than cement-based mortars, where required.

FLEXI-MATRIX 545 Epoxy Polymer Concrete

FLEXI- TOP 550 Overlayment and Resurfacing Mortar
FLEXI-TOP 555 Repair Mortar

FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives

Bonding Agents

FLEXI-BOND 540 Epoxy Bonding Agent (New Concrete to Old Concrete)

FLEXI-WELD 520, 520T Epoxy Adhesives

Crack Repair

FLEXI-SEAL 510, 510-U Flexible Epoxy Crack Fillers

FLEXI-FILL 530 Epoxy Filler

Floor & Deck Primer

FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer

Waterborne Coatings

AQUATHANE UA-210 Types E, EE, F, NCL and H-A/G Waterborne Polyurethane Coatings

AQUEPOXY 250 Waterborne Immersion-Grade Epoxy

Epoxy Coatings & Flexible Epoxy Membranes

FLEXI-DECK 500-E Modified Epoxy Flex-Coat

FLEXI-GARD 500-N Novolac Epoxy Coatings
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy

FLEXI-GARD 500-S Low Viscosity Epoxy Coatings

FLEXI-DECK 500-U Urethane-Epoxy Elastomeric Deck Coating

Maximum Chemical Resistance

FLEXI-GARD 500-N Novolac Epoxy Coatings
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy

Fast-Cure/Low Temperature

FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

Last Updated:

Saturday, November 15, 2008


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE.